|
 Adapts
M-2001 Series Digital Tapchanger Control to Replace General Electric ML-32
Balance Beam Regulator Controls
The M-2356B is an adapter panel which, when combined with the M-2001 Series Digital Tapchanger
Control, provides convenient direct replacement
for General Electric ML-32 balance beam regulator controls. The M-2356B
consists of a front panel and two wiring harnesses with octal plugs which
mount into the control cabinet. All mounting hardware from the faceplate
and socket housing of the original control must be saved, including: the
two wing nuts, the two thumbscrews and C-clips, and two nuts, washers
and bolts.
- Connects easily to the M-2001 Series Digital Tapchanger Control using
mounting screws and 24-pin connector
- Fits directly into existing regulator control cabinet using the same
mounting hardware from the faceplate and socket housing of the original
control
- Provides built-in CT shorting protection when the M-2001 Series Digital
Tapchanger Control is removed
Interface
External connections are made via two wiring harnesses with octal plugs
that mount through the octal sockets on the existing control cabinet.
Most connections come from a fifteen-position terminal block on the printed
circuit board and a four-position terminal block to the octal plugs. An
additional terminal block (TB2) on the printed circuit board provides
access to auxiliary functions, including self-test alarm, userprogrammable
alarm, auto disable and manual raise/lower.
Features
Separate fuses for test terminal, voltage sensing and motor power are
on the front panel. Spare fuses for each are in the fuse holder. Bindi
RAISE/OFF/LOWER, AUTO/OFF/MANUAL and VOLTAGE SOURCE switches, DRAG HANDS
RESET button, and NEUTRAL LIGHT are standard. NEUTRAL LIGHT will light
to indicate that the regulator is in the neutral position, for those products
equipped with a circuit for this purpose.
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
|
 |
 |
Note: Documents are provided in Adobe
Acrobat PDF format and require Acrobat
5.0 or higher to view.
|
|
