|
 Adapts
M-2001 Digital Tapchanger Control to Replace Pennsylvania Transformer/McGraw
Edison "Pole Star" Regulator Controls
The M-2345A is an adapter panel which, when combined with the M-2001
Series Digital Tapchanger Control, provides convenient direct replacement
for Pennsylvania Transformer/McGraw Edison Pole Star regulator controls.
The M-2345A consists of a front panel with hinge leaves that mount into
the existing control cabinet.
- Connects easily to the M-2001 Digital Tapchanger Control using mounting
screws and 24-pin connector
- Provides direct mechanical replacement of the old regulator control
using the existing cabinet and hinges
- Provides built-in CT shorting protection when the M-2001 Tapchanger
Control is removed
Interface
External connections are made using a wiring harness that connects from
a fifteen-position terminal block to the terminal block on the existing
control cabinet. An additional terminal block provides auxiliary functions,
including self-test alarm, user-programmable alarm, auto disable and manual
raise/lower.
Features
Separate fuses for test terminal, voltage sensing and motor power are
on the front panel, and spare fuses for each are in the fuse holder.
Binding posts on the front panel allow easy connections for test procedures.
RAISE/OFF/LOWER, AUTO/OFF/MANUAL and VOLTAGE SOURCE switches, DRAG HANDS
RESET pushbutton, and NEUTRAL LIGHT are standard.
NEUTRAL LIGHT will light to indicate that the regulator is in the neutral
position, for those regulators equipped with a circuit for this purpose.
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
|
