|
 Adapts
M-2001 Series Digital Tapchanger Control to Replace Pennsylvania Transformer
(McGraw-Edison) Pole Star Regulator Controls
The M-2324C is an adapter panel which, when combined with the M-2001
Series Digital Tapchanger Control, provides convenient direct replacement
for Pennsylvania Transformer (McGraw-Edison) Pole Star regulator controls
hinged on the right side. The M-2324C consists of a front door panel with
hinge leaves on the right side and mounts into the control cabinet using
the existing two hinges, and knurled knob which must be saved from the
original control.
- Connects easily to the M-2001 Series Digital Tapchanger Control using
mounting screws and 24-pin connector
- Fits directly into existing regulator control cabinet using the existing
two hinges and knurled knob
- Provides built-in CT shorting protection when the M-2001 Series Digital
Tapchanger Control is removed
Interface
External connections are made via a wiring harness that connects to the
terminal block in the existing control cabinet. Most connections come
from a fifteen-position terminal block on the printed circuit board. An
additional terminal block (TB2) provides access to auxiliary functions,
including self-test alarm, userprogrammable alarm, auto disable and manual
raise/lower.
Features
Separate fuses for test terminal, voltage sensing and motor power are
on the front panel. Spare fuses for each are in the fuse holder.
Binding posts on the front panel allow easy connections for test procedures.
RAISE/OFF/LOWER, AUTO/OFF/MANUAL and VOLTAGE SOURCE switches, DRAG HANDS
RESET button, and NEUTRAL LIGHT are standard.
NEUTRAL LIGHT will light to indicate that the regulator or transformer
is in the neutral position, for those products equipped with a circuit
for this purpose.
Contains circuitry necessary for motor current seal-in.
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
|
