|
 Adapts
M-2001 Series Digital Tapchanger Control to Solid-State Controls for Howard
Industries SVR-1
- Provides direct mechanical replacement of the old regulator control
using the same two hinge pins
- Provides built-in CT shorting protection when the M-2001 Series Digital
Tapchanger Control is removed
- Optional Local Voltage Reduction and SCADA Local/Remote Control switches
available for use with Comprehensive and BASE-T controls
The M-2301B is an adapter panel which, when combined with the M-2001
Series Digital Tapchanger Control, provides convenient direct replacement
of Howard Industries SVR-1 solid-state controls. The M-2301B consists
of a front panel with hinge leaves, and mounts into the control cabinet
using the same two hinge pins which must be saved from the original control.
Interface
External connections are made using a wiring harness that connects from
a sixteen-position terminal block to the terminal block on the existing
control cabinet. An additional terminal block provides auxiliary functions,
including self-test alarm, user-programmable alarm, auto disable and manual
raise/lower.
Features
Separate fuses for test terminal, voltage sensing and motor power are
on the front panel, and spare fuses for each are located in the fuse holder.
Binding posts on the front panel allow easy connections for test procedures.
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
|
