|
The M-2299 is an adapter panel which, when combined with the M-2001
Series Digital Tapchanger Control, provides convenient direct replacement
of Toshiba TB-R800 regulators. The M-2299 mounts into the control cabinet
using the same two hinge pins which must be saved from the original regulator.
- Connects easily to the M-2001 Series Digital Tapchanger Control using
mounting screws and 24-pin connector
- Provides direct mechanical replacement of the existing regulator control
- Provides built-in CT shorting protection when the M-2001 Series Digital
- Tapchanger Control is removed
Interface
External connections are made via a wiring harness that connects from
a fifteen-position terminal block to the ”BT” terminal block on the existing
control cabinet. An additional terminal block provides access to auxiliary
functions, including self-test alarm, user-programmable alarm, auto disable
and manual raise/ lower.
Features
Separate fuses for test terminal, voltage sensing and motor power are
on the front panel. Spare fuses for each are in the fuse holder. Binding
posts on the front panel allow easy connections for test procedures. RAISE/OFF/LOWER,
AUTO/OFF/MANUAL, and VOLTAGE SOURCE switches and NEUTRAL LIGHT are standard.
NEUTRAL LIGHT will light to indicate that the regulator is in the neutral
position, for those regulators equipped with a circuit for this purpose
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
|
