|
 The
M-2280B is an adapter panel which, when combined with the M-2001
Series Digital Tapchanger Control, provides convenient direct replacement
for General Electric static LTC transformer and regulator controls and
some balance beam models.
- Connects easily to the M-2001 Series Digital Tapchanger Control using
mounting screws and 24-pin connector
- Provides direct mechanical replacement of the existing control
- Provides built-in CT shorting protection when the M-2001 Series Digital
Tapchanger Control is removed
Interface
External connections are made to a terminal block located on the top of
the rear panel of the M-2280B. Additional connections may be made to two
terminal blocks located on the printed circuit board of the adapter panel.
These terminal blocks provide access to auxiliary functions, including
self-test alarm, userprogrammable alarm, auto disable and manual raise/lower.
Features
Separate fuses for test terminal, voltage sensing and motor power are
located on the front panel. Spare fuses for each are in the fuse holder.
Binding posts on the front panel allow easy connections for test procedures.
RAISE/OFF/LOWER, AUTO/OFF/MANUAL and VOLTAGE SOURCE switches, DRAG HANDS
RESET button, and NEUTRAL LIGHT are standard.
NEUTRAL LIGHT will light to indicate that the regulator is in the neutral
position, for those products equipped with a circuit for this purpose.
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
|
 |
 |
Note: Documents are provided in Adobe
Acrobat PDF format and require Acrobat
5.0 or higher to view.
|
Archives
|
