|
 The
M-2264 is an adapter panel which, when combined with the M-2001
Series Digital Tapchanger Control, provides convenient direct replacement
of balance beam controls for General Electric ML-32 regulators. The M-2264
mounts into the control cabinet using the same two thumbscrews which must
be saved from the original control.
- Connects easily to the M-2001 Series Digital Tapchanger Control using
mounting screws and 24-pin connector
- Provides direct mechanical replacement of the existing regulator control
using the same two thumbscrews
- Provides built-in CT shorting protection when the M-2001 Series Digital
Tapchanger Control is removed
Interface
External connections are made via a wiring harness that connects from
a fifteen-position terminal block to the terminal block on the existing
control cabinet. An additional terminal block provides access to auxiliary
functions, including self-test alarm, user-programmable alarm, auto disable
and manual raise/lower.
Features
Separate fuses for voltage sensing and motor power are on the front panel.
Spare fuses for each are in the fuse holder.
Binding post on the front panel allows easy connections for test procedures.
RAISE/OFF/LOWER and AUTO/OFF/MANUAL switches, DRAG HANDS RESET button,
and NEUTRAL LIGHT are standard.
NEUTRAL LIGHT will light to indicate that the regulator is in the neutral
position, for those regulators equipped with a circuit for this purpose.
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
|
