|
 |
 |
 |
 |
|
|
| ||||
 |
 |
 |
|
 |
|
|
 |
 |
|
|
|
|
| ||
 |
|
 |
 |
 |
 |
|
|
||||
|
Adapts M-2001 Digital Tapchanger Control to replace Reinhausen MK30 Control
The M-2230 Adapter Panel combines with the M-2001 Series Digital Tapchanger Control to provide convenient, direct mechanical replacement for the Reinhausen MK30 control in the existing enclosure. M-2230 Differences Relative to the MK30 – Revised connections will be needed if paralleling transformers using the circulating current method with the Reinhausen SKB5 or SKB-20 Parallel Control Units. (Please contact Beckwith Electric Company for further information.) If paralleling transformers using the SKB-30 Electronic Parallel Control, then the M-2230 cannot be used. The M-2230 provides one normally open contact for the Raise and Lower outputs. The MK30 normally closed contacts for Raise and Lower are not provided on the M-2230. The Adapter Panel provides one status contact that may be programmed to close when the control is blocking for overcurrent, overvoltage, or undervoltage. Interface External connections are made to one terminal block, located on a separate (provided) bracket which mounts within the existing enclosure. Features Fuse for voltage sensing is on the front panel. A spare fuse is provided within the fuse housing. AUTO/OFF/MANUAL switch
|
 |
|
||||||||
|
|
|
 |
 |
|
|
|
