|
Provides surface mounting of the M-2001 Series Digital Tapchanger
Controls for applications which do not require features of adapter panels
The M-2050 is an adapter kit which permits surface mounting of the M-2001
Series Digital Tapchanger Controls on any flat surface at least 5.8" wide
x 10.0" high. It consists of two right angle mounting brackets that bolt
to the rear of the top and bottom of the M-2001 using four .25" screws.
Also included is a 24-pin, in-line female connector with a six-foot pigtail
on each pin to facilitate connection of the M-2001 in original equipment
manufacturers' applications. The M-2050 does not include features available
on adapter panels, such as mechanical configurations and wiring connections
for direct replacement, or front panel switches, fuses or test points.
- Connects easily to the M-2001 Series Digital Tapchanger Control using
two right angle mounting brackets, four screws and a 24-pin connector
with a six-foot pigtail on each pin.
- Provides mounting onto any flat surface at least 5.8" wide and 10"
high.
Interface
External connections are made to the wires of the 24-pin connector assembly.
The 24-pin connector plugs into the bottom of the M-2001 and provides
standard functions, such as motor power input, voltage input, voltage
reduction and tapchanger raise and lower, along with auxiliary functions,
such as self-test alarm, user-programmable alarm and operations counter.
Refer to M-2001B Instruction Book for pin assignments.
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
|
 |
 |
Note: Documents are provided in Adobe
Acrobat PDF format and require Acrobat
5.0 or higher to view.
|
|
