|
 Integrated
Protection SystemŪ for Generators of All Sizes
The Generator Protection system M-3430 provides protection, control,
monitoring and user interface functions. Includes protection for stator
phase and ground faults, loss-of-field, overexcitation, current unbalance
(negative sequence), abnormal voltage and frequency, anti-motoring and
inadvertent energizing. Breaker failure, VT fuse loss and system backup
protection also provided. Stored targets and oscillography can be IRIG-B
synchronized. Dual RS-232 and RS-485 communication ports provide user-interface
capabilities. The M-3800A IPScomŪ Communications Software is included
for direct serial or remote communication access. Waveform data can be
downloaded using IPScomŪ, while the
M-3801D IPSplotŪ Plus Oscillograph Analysis
Software allows for plotting and printing of the downloaded data.
- Microprocessor-based Generator Protection Relay that uses digital
signal processing technology to provide fifteen protective relaying
functions
- Individually programmed input contacts that can be programmed to activate
the output contacts.
- Provides time-targeted information for the 32 most recent events
- Local and remote communications ability
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
Support
The IPS
(Integrated Protection Systems) Communication Application Note contains
valuable information for anyone trying to establish serial communication
to Beckwith Electric's IPS family of generator or transformer protection
relays.
BECO2200 is just one of Beckwith Electric's serial communication protocols.
BECO2200 has been incorporated in the M-3420,
M-3520, M-3430, M-3440 and M-3310 line of protective relays. Technical
information on this protocol can be found in the BECO2200
Communication Protocol document.
Communication database information for the M-3430 can be found in documents
that support various protocols as listed in the title
MODBUS and BECO 2200 - Communications Database for
the M-3420.
MODBUS protocol is supported on the
M-3430 control. See the IPS
Application Note and the communication database document for more
information.
IPScom, Beckwith Electric's PC based communication software package
provides an easy to use graphical Windows interface for setting all
parameters in the Integrated Protection System relay. At this time IPScom
only supports BECO2200 protocol for communication.
|
