|
 Integrated
Protection SystemŪ for Generators of All Sizes
The Integrated Protection System M-3425 provides protection, control,
monitoring and user interface functions for generator protection. Stored
targets and oscillography can be IRIG-B synchronized. Dual RS-232 ports
and an RS-485 port provide user-interface communication capabilities.
The M-3820A IPScomŪ Communications Software is included
for direct serial or remote communication access. Waveform data can be
downloaded using the M-3801 IPSplotŪ Oscillograph Analysis
Software which allows for plotting and printing of the downloaded oscillographic
data.
- Provides all major protective functions for generator protection,
including Field Ground (64F), Out-of-Step (78), and Split-Phase Differential
(50DT)
- Expanded IPScom Communications Software provides simple and logical
setting and programming
- Enhanced "pick and choose" functionality provides tailored applications
at the lowest possible cost.
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
Support
The IPS
(Integrated Protection Systems) Communication Application Note contains
valuable information for anyone trying to establish serial communication
to Beckwith Electric's IPS family of generator or transformer protection
relays.
BECO2200 is just one of Beckwith Electric's serial communication protocols.
BECO2200 has been incorporated in the M-3420,
M-3520, M-3430, M-3440 and M-3310 line of protective relays. Technical
information on this protocol can be found in the BECO2200
Communication Protocol document.
Communication database information for the M-3420 can be found in documents
that support various protocols as listed in the title
MODBUS and BECO
2200 - Communications Database for the M-3420.
MODBUS protocol is supported on the
M-3420 control. See the IPS
Application Note and the communication database document for more
information.
IPScom, Beckwith Electric's PC based communication software package
provides an easy to use graphical Windows interface for setting all
parameters in the Integrated Protection System relay. At this time IPScom
only supports BECO2200 protocol for communication.
|
