The Beckwith Electric M-2148 Adapter Panel, used in conjunction with the M-2001 series Tapchanger Control, uses modern electronic digital design and
digital processing circuitry to achieve an overall stability and resolution anattainable with electromechanical and analog design tapchanger controls. CMOS semiconductors are used throughout the design.

The M-2148 Adapter Panel, with the M-2001 series Tapchanger Control, provides a solid-state voltage control relay designed to directly replace the General Electric LRT 48C2 control. There are several sizes of LRT 48 controls, therefore, verify that the M-2148 is the correct replacement. The combination of the Tapchanger Control and Adapter Panel includes the following features:

• Voltage waveform sampling and digital processing circuitry ensure accurate rms voltage sensing in the presence of distortion on the input voltage and current.
• Control accuracy is +/-0.3 % when tested in accordance with the ANSI/IEEE C57.15.9-1999 standard over a temperature range of –30° C to +65° C. The control accuracy is +/-0.5 % when tested over the full operational temperature range of –40° C to +85° C.
• Input and output circuits are protected against system transients. Units pass all requirements of ANSI/IEEE C37.90.1- 1989, which defines surge withstand capability. All input and output terminals will withstand 1500 V ac rms to chassis or instrument ground for one minute with a leakage current not to exceed 25 mA, for all terminals to ground. Input and output circuits are electrically isolated from each other, from other circuits and from ground.

Interface
External connections are made to one terminal block located on the rear of the adapter panel.

Sales and Service

For sales and service information contact your local representative or contact the factory:

E-mail: sales@beckwithelectric.com
Call (727) 544-2326 or Fax (727) 546-0121