|
Performs All Necessary Logic And Control Functions for Motor Bus Transfers
at Power Plants and Industrial Facilities
Automatically Selects Fast, In-Phase or
Residual Voltage Transfer Method
Transfer may be initiated manually or via protective relays external
to the
system.
- System will automatically initiate a transfer, should the motor bus
voltage drop below a preset voltage for a preset time.
- Four isolated output contacts are used to trip and close two breakers.
- The M-0272A Transfer Logic Controller works in conjunction with the
M-0236B Power Transfer Relay for in-phase transfers.
- Provides for load shedding prior to initiating residual voltage transfers.
- Eliminates the need for parallel transfers.
The SyncrotranŽ Motor Bus Transfer System is
an integrated system that provides for one way and bidirectional Automatic
and Manual Transfer of auxiliary motor bus systems between two sources
of power in power plants and industrial facilities to ensure continuity
of plant operation and processes. The system automatically selects between
Fast, In-Phase, and Residual Voltage motor bus transfer methods, based
on varying system conditions. The Fast Transfer Method can be selected
to operate in either the Sequential or Simultaneous Mode. The Syncrotran
System continuously monitors the main or incoming source, the motor bus
and the startup or bus tie source to ensure the integrity of the motor
bus. The system consists of the M-0272A Transfer Logic Controller and
the M-0236B Power Transfer Relay.
Sales and Service
For sales and service information
contact your local representative
or contact the factory:
E-mail: sales@beckwithelectric.com
Call (727) 544-2326
or Fax (727) 546-0121
|
